How To Operate - Nostalgia Electrics Homecraft HCMF4BK Instruction Manual

HOW TO OPERATE

Before first use, carefully unpack your MILK FROTHER, remove all packaging materials, and
then follow the cleaning instructions under the CLEANING & MAINTENANCE section.
WARM AND THICK FOAM
1. Place the milk frother upright on a dry, sturdy and heat-
resistant surface near an electrical outlet.
2. Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
3. Fill the jar with the desired amount of milk and put the lid on.
NOTE: Minimum milk capacity for WARM & THICK FOAM is 3 oz. Max capacity is 5 oz.
Refer to chart to decide how much milk to put in - type of milk used may vary.
4. Connect the plug into an electrical outlet and place frother onto base.
5. Press the FUNCTION button once and the WARM &
THICK FOAM indicator light will illuminate.
6. Press the ON/OFF button to begin frothing process.
NOTE: This setting will take approximately 50 to 90 seconds. The frother
will turn off automatically when cycle is finished. If you want to stop the
frothing process at any moment, press ON/OFF button once.
7. Take frother off base, remove lid and pour out warm froth and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles
otherwise frother will stop and will flash, indicating that it needs to cool down.
WARM AND THIN FOAM
1. Place the milk frother upright on a dry, sturdy and heat-
resistant surface near an electrical outlet.
2. Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
3. Fill the jar with the desired amount of milk and put the lid on.
NOTE: Minimum milk capacity for WARM & THIN FOAM is 3 oz. Max capacity is 5 oz.
Refer to chart to decide how much milk to put in - type of milk used may vary.
4. Connect the plug into an electrical outlet and place frother onto base.
5. Press the FUNCTION button twice and the WARM & THIN FOAM indicator light will illuminate.
6. Press the ON/OFF button to begin frothing process.
NOTE: This setting will take approximately 50 to 90 seconds. The frother
will turn off automatically when cycle is finished. If you want to stop the
frothing process at any moment, press ON/OFF button once.
7. Take frother off base, remove lid and pour out warm froth and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles
otherwise frother will stop and will flash, indicating that it needs to cool down.
6