Advertisement
Quick Links
2019
ECA Electronic Engineering
Yearly & Weekly Timer
with GSM Access Control
ECA Models:
GSM-18V4.1
GSM-18V4YT
User Manual
Version 1
Manufactured by ECA Electronic Engineering Pty LTD
Address: 76 -80 Levanswell Rd. Moorabbin Vic. 3189 Australia.
TEL: +61 3 95720535
Email: ecaelectronic@bigpond.com
www.gatesonsolar.com
Access control only
Access control with Yearly Timer
1
Advertisement
Related Manuals for ECA GSM-18V4.1
Summary of Contents for ECA GSM-18V4.1
- Page 1 GSM Access Control ECA Models: GSM-18V4.1 Access control only GSM-18V4YT Access control with Yearly Timer User Manual Version 1 Manufactured by ECA Electronic Engineering Pty LTD Address: 76 -80 Levanswell Rd. Moorabbin Vic. 3189 Australia. TEL: +61 3 95720535 Email: ecaelectronic@bigpond.com www.gatesonsolar.com...
- Page 2 ECA Electronic Engineering GSM Access control Model : GSM18V4 1. GSM Access Control General Overview This GSM access control system that can store up to 2000 users (phone numbers) and trigger the gate to open at no cost of a call. When users call the SIM card of the unit, the unit hangs-up the call and checks if the phone number of the caller is in the system, and triggers the gate only if the phone number is an authorized user.
- Page 3 _________________________________________________________ Please make sure that the mobile phone you are using to program this unit has its Caller ID ON. Follow the instructions below to program the unit by SMS as per instructions below: 1. Adding and Deleting phone numbers You can program and add up to 1600 phone numbers to be as normal users by sending SMS.
- Page 4 The unit will reply by SMS that says: “The local time is: HH:MM / DD.MM.YYYY, Weekday.” 4. Adding or Deleting “Special Users” You can program up to 400 phone numbers to be as “SPECIAL USER”. A “special user” is a Phone Number that has limited access on certain times of the day and is limited to access the property on special days of the week only.
- Page 5 5. How to choose the relay’s function; Pulse or Latch You can choose one out of two following functions for the internal relay; MOMENTARY (PULSE) or LATCH function (ON / OFF). The factory default setting for the relay is a MOMENTARY function (with a 1 second PULSE). You can choose the required setting by SMS command as follows: 9999pulse01 For Momentary Function Send SMS:...
-
Page 6: Hold Command
Automatic Learning of all phone numbers The unit can be set to learn up to 1600 Normal Users automatically while the users call the unit to activate the relay. In this mode the unit checks the caller’s ID (the mobile phone number) of each incoming call and registers it automatically in the system’s memory and at the same time triggers the relay according to the chosen setting. - Page 7 9999defualt The unit will reply by SMS that says: “THIS IS A WARNING from ECA Electronic Engineering. Do you wish to DELETE all the phone numbers and set the unit to factory default ? “ To proceed and default the unit, you must confirm within 2 minutes...
- Page 8 How to customize the SMS message for INPUT – 1 You can customize the SMS message that the unit sends back when this input-1 is triggered to suit different applications. The default SMS messages send by the unit is: When the input-1 is connected to ground: The gate is closed.
-
Page 9: Weekly Timer
--------------------------------------------------------------------------------------------------------- Weekly Timer This smart system will automatically set its local time, date and daylight savings changes as soon as it is powered up. The weekly timer can be set to turn ON and OFF the internal relay on certain days and at certain time intervals. -
Page 10: Yearly Timer
Yearly Timer The yearly timer can be programmed to overtake control of the weekly timer and turn ON or OFF the relay on certain days at certain times. For example; to turn OFF the relay on 1 of September 2019 from 7:00AM till 13:00PM the next day. This feature is very useful for setting public holidays and special events without the need of accessing the unit on site. - Page 11 2. How to get all the Yearly Timer’s events that are registed in the unit You can get the Yearly Timer events with the following SMS message: 9999YT.report Send SMS: The unit will reply back by SMS that says: “No events are recorded for the Yearly Timer” “The yearly timer is set for: 21.05.18, 07:00AM till 21.05.18, 12:00PM, the system is ON 02.12.18, 00:00AM till 05.12.18, 24:00PM, the system is OFF.”...