Finding A Contacts Entry - Samsung SCH-a870 Series User Manual

Finding a Contacts Entry

Voice Method
Use the VoiceSignal Contacts command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
In standby mode, press and hold the
1.
"Say a Command" appears in the display and is pronounced through the
speaker.
Say "Lookup".
2.
VoiceSignal prompts you to "Say the name."
Speak clearly and say the full name of the person you want to call, exactly
3.
as it is entered in your contact list.
If VoiceSignal recognizes the name you said, the contact information for that name
appears in the display.
If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with "Did you say
lookup?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next name, or use the
4.
keypad to select the correct name from the list. (See 'Choice Lists" on
page 116, for more information.)
To say the name again, press the Help (right) soft (
To exit VoiceSignal without dialing, press the Settings (left) soft (
press the Cancel (right) soft (
The contact information for the name you selected appears in the display.
5.
Press
Press the Erase (left) soft key (
Press the EDIT key (
Press the Options (right) soft key (
display:
Send Txt Msg
Send Pic Msg
Call
Soft Key Method
If you've stored a name entry in Contacts, Find allows you to find it quickly.
52
).
to dial the number associated with the name.
) to erase this entry from your Contacts list.
) to add or change information for this entry.
key to launch VoiceSignal.
) key.
) and the following options popup in the
) key and