Samsung Seek SPH-M350 Online User's Manual page 74

—Use the Bluetooth capabilities of your
Bluetooth
old phone to transfer all of your contacts to the
phone. See "2I. Bluetooth" on page 98.
Transfer Contacts with Bluetooth
The process of transferring data via Bluetooth is also
known as "beaming" and might be referred to that way
within other literature.
To set up your old phone and the Seek to transfer
contacts:
1.
Turn on your old phone and then activate the
Samsung Seek.
2. Activate Bluetooth functionality on your old phone
and set visibility to
3.
Activate Bluetooth on your new phone by pressing
and touch
Main
Settings > Bluetooth
4. Touch the Bluetooth button to toggle it to the
state. (The page then refreshes to reveal new
functionality and options.)
5. Touch and set your Bluetooth visibility to
Visibility
.
Always visible
64 2D. Contacts
(page 99).
Always visible
( )
Main > Settings/Tools >
.
To pair the two phones and send contacts to your
Samsung Seek:
1. On your Samsung Seek phone, press
touch
Main
Bluetooth > Trusted Devices.
Devices" on page 100.
2.
Select the previous phone by touching its name.
3.
Once connected and communicating, confirm the
PIN code on both phones match.
4.
Slide the connection slider on the Seek to
Accept the connection and confirm the PIN on
your other device.
5. On your old phone, go to the Bluetooth function
that allows you to send all of your contacts to the
trusted device.
6. Select a contact and begin the transmit process.
7. On the Seek, move the acceptance slider to the
On
right and
phone begins transmitting the new contact entry
and the Seek begins the storage process.
( )
Main > Settings/Tools > Settings >
See "Pairing Bluetooth
. Within a few seconds, your other
Accept
and
.
Accept