Samsung Seek SPH-M350 User Manual page 97

2.
From the "Say a Command" page, touch
– or –
Press and touch
Speech to Action .
From the Settings page you can configure the verbal
Confirmation, activate the training mode (Adaptation),
configure the modes (Expert/Prompt), or get
information about the Speech to Action software.
To change ASR confirmation:
Your phone can be configured to take a specific action
prior to initiating any voice command parameter.
1. Press and touch
Command.
– or –
Press and hold
2.
From the "Say a Command" page, touch
.
> Confirmation
– or –
Press and touch
Speech to Action > Confirmation
Settings
( Main )
Main > Settings >
( Main )
Main > Voice
.
Settings
( )
Main Main > Settings >
.
3.
. Touch one of the available options:
to always provide you with options if
Automatic
there was an issue registering the command,
confirm any commands, and then announce any
actions.
Always Confirm
actions before they are done, even if it was
properly registered.
Never Confirm
operations. The phone will always act on what it
registers as the current command, even if it is
incorrect and without notifying you.
Adaptation
To adapt the system to your voice:
1.
Press and touch
Command.
Note: This can also be reached from
Speech to Action
2.
From the "Say a Command" page, touch
> Adaptation > Adapt Voice > Start
to always confirm any command
to never confirm any command
Main
( )
Main > Voice
Main > Settings >
.
.
2F. Voice Services
Settings
87