Chapter 46: Replacing The Power-Button Module; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the power-button module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

Steps
1. Align the screw hole on the power-button board with the screw hole on the palm rest and keyboard assembly.
2. Adhere the power-button board cable to the palm rest and keyboard assembly.
3. Adhere the tape that secures the power-button board to the palm rest and keyboard assembly.
4. Replace the screw that secures the power-button board to the palm rest and keyboard assembly.

Post-requisites

Steps
1. Replace the display panel.
2. Replace the heat-sink assembly.
3. Replace the system-board
4. Replace the wireless card.
5. Replace the memory modules.
6. Replace the battery.
7. Replace the hard drive.
8. Replace the I/O board.
9. Replace the base cover.
10. Replace the optical drive.
computer. After working inside your computer, follow the instructions in
assembly.
www.dell.com/
Replacing the power-button module
46
After working
77