Connecting To A Power Source; Using The Batteries; Removing The Battery - Samsung DIGIMAX V70 User Manual

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5.0V 2.0A).
We recommend using batteries for a digital camera (Within a year from the date of
manufacture). The batteries are listed below.
Non rechargeable batteries : AA type
Rechargeable batteries

Using the batteries

1. Open the battery chamber
cover by pushing in the
direction of the arrow.

Removing the battery

There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
- Alkaline(High capacity), Ni-Mn(High capacity),
CR-V3 type - Lithium
: AA type - Ni-MH (over 2300mAh), Ni-Cd (over 1100mAh)
CR-V3 type - SBP-1303
Exclusive type - SLB-1437
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
2. Insert the batteries taking
note of the polarity (+ / -).
: Please use the following steps to remove the manufacturer's
rechargeable battery SLB-1437.
1. Turn off the camera power. Open the battery chamber cover and
move the battery holder aside. The battery will be released.
2. Take out the battery and close the battery chamber cover.
The batteries are fully
charged.
Ni-Zn(High capacity), Lithium
3. To close the battery
Prepare new
batteries.
chamber cover, push it
until it clicks.
There is no battery capacity.
Replace with new batteries.
15