Start Up Image; Formatting A Memory; Selecting Video Out Type - Samsung DIGIMAX L70 User Manual

Setup menu

[ Start up image ]

■ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
● Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with
the [START IMAGE] in the [RESIZE] menu in the
play mode.
- The start-up image will not be deleted by
[DELETE] or [Format] menu.
- The User images will be deleted by [Reset]
menu.

[ Formatting a memory ]

■ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
● Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
《54》

[ Selecting Video out type ]

■ The Movie output signal from the camera can be NTSC or PAL. Your choice of
Sound Volume
Shutter Sound
Beep Sound
■ Connecting to an external monitor
Start Sound
◀
Start Image
Set:MENU Exit:M
Format ◀ No
Video Out Yes
USB
Reset
Set:MENU Exit:M
output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
- Connect the camera to an external monitor with the
supplied AV cable.
◀
Format NTSC
Video Out PAL
USB
Reset
Set:MENU Exit:M
Yellow - Video
White - sound