Flash / Left Button - Samsung DIGIMAX D103 User Manual

Flash ( ) / Left button
■ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
● Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
● Flash range
Normal
ISO
WIDE TELE
0.8 ~ 4.8 0.8 ~ 4.3
AUTO
《22》
[Selecting the Auto flash]
Macro Auto macro
WIDE TELE WIDE
0.4 ~ 0.8 0.5 ~ 0.8 0.4 ~ 4.8
INFORMATION
● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
● Using the flash frequently will reduce the life of the battery.
● Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
● During the continuous shot, AEB and movie clip mode, the flash function will
not operate.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or highly
reflective.
● When taking an image in a poorly lit condtion with the flash, there may be a
(Unit : m)
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the floating matters. It is not camera malfuction.
TELE
0.5 ~ 4.3