Wired Remote Controller-Buttons And Display - Samsung HC175TGZA Owner's Instructions Manual

Wired Remote Controller-Buttons and Display

The wired remote controller is an optional accessory and it is installed on the wall.
To use the wired remote controller, refer to an appropriate manual.
Communication error indicator
Temperature adjustment
N N o o t t e e
N N o o t t e e
8
E-
On Timer setting
Off Timer setting
Test indicator
buttons
On Timer button
Off Timer button
Test button
- Test button is for your installation specialist. You must NOT press it.
- After cleaning the air filter, press the filter reset button, if the filter has been
installed. Then the wired remote controller will display the FILTER SIGN indicator
when the time to clean the air filter; refer to page 12 or 13.
- Duct type air conditioner does not have function of adjusting air flow direction.
Therefore, the function is not operated even if you press the swing button.
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Mode selection button
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed
adjustment button
Swing button
(Not operated)
Filter Reset button