Setting Timer; On Timer - Samsung AVXWVH022EE User Manual

Wall mounted type series
Hide thumbs Also See for AVXWVH022EE:
Table of Contents

Advertisement

SETTING TIMER

This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are
away. Simply set the time and your air conditioner will turn on/off automatically.

On timer

This function allows you to turn on the air conditioner automatically within the time range of
24 hours. On timer is available while your air conditioner is on/off.
1. Press the On button on the remote control.
On timer indicator blinks on the remote control display.
2. Set the time you want the air conditioner to turn on
automatically.
Press the Up or Down button on the remote control
to change the time setting while On timer indicator is
blinking. You can set the time up to 24 hours, increasing
in 30 minute unit up to first 3 hours and in hourly unit
after first 3 hours.
3. Press the Set/Cancel button on the remote control to
active it on.
The remote control display will show the hour(s) you have set.
The air conditioner will operate automatically at set time and then On timer indicator
disappears. If On timer is not set within 10 seconds, the air conditioner will end setting.
4. Set the operating mode.
Press the Mode button on the remote control until the
desired mode appears on the remote control display.
The air conditioner will operate in the mode you set.
On timer function is available in Auto/Cool/Dry/Fan/Heat
mode.
• Temperature can also be adjusted.(See step 3 on page 15 for instructions.)
• After the set up while the unit is off, approximately after 10 seconds, all the other
• Setting time allows you to change by pressing the On button. Press the Up or Down
To deactivate the On timer
1. Press the Set/Cancel button on the remote control.
On timer you set will be canceled and On timer indicator will disappear.
AVXWV£ª£ª_IB IM_E_29812.indd 21
indicators will be gone except the On timer indicator and remaining time.
button to change time setting and then press the Set/Cancel button to active it on.
using advanced functions _21
2008-11-12 13:41:56

Advertisement

Table of Contents
loading

Table of Contents