Emergency Towing - Hyundai KONA Electric 2020 Owner's Manual

Hide thumbs Also See for KONA Electric 2020:

Table of Contents

What to do in an emergency

OOSEV068011N

2. Remove the hole cover by press-

ing the lower part of the cover on

the front or rear bumper.

3. Install the towing hook by turning it

clockwise into the hole until it is

fully secured.

4. Remove the towing hook and

install the cover after use.

Emergency Towing

If towing is necessary, we recom-

mend you have it done by an author-

ized HYUNDAI dealer or a commer-

cial tow truck service.

If towing service is not available in an

emergency, your vehicle may be

temporarily towed using a cable or

chain secured to the emergency tow-

ing hook at the front (or rear) of the

Use extreme caution when towing

the vehicle with a cable or chain. A

driver must be in the vehicle to steer

it and operate the brakes.

Towing in this manner may be done

only on hard-surfaced roads for a

short distance and at low speeds.

The driver must be in the vehi-

cle for steering and braking

operations when the vehicle is

being towed. Passengers other

than the driver must not be in

the vehicle.

Table of Contents