Table of Contents
Advertisement
Selecting Energy Saving Mode
16
E-
If your wish to save energy when using your air conditioner,
select the Energy saving mode with the Energy saving button.
1
If necessary, press the
Result:
The air conditioner starts up in the Cool mode.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
Press the
button.
Result:
The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
- If the selected temperature is lower than 25°C,
it will slowly rise up to 26°C.
- If the selected temperature is higher than 26°C,
it will slowly rise.
The outer air flow blade moves up and down.
3
To adjust the temperature, press the
the required temperature is displayed. Possible temperatures are between
O
O
26
C and 30
C inclusive.
You can adjust the temperature only when the air conditioner
N N
o o
t t
e e
N N
o o
t t
e e
runs in the Cool mode.
4
To select the fan speed, press the
required setting is displayed.
You can adjust the fan speed only when the air conditioner
N N
N N
o o
o o
t t
t t
e e
e e
runs in the Cool mode.
5
To control the direction of the air flow, refer to pages 18~19.
button.
button one or more times until
button one or more times until the
Advertisement
Table of Contents
