Advertisement
Quick Links
Installation Instructions
WaveLinx Wireless Area Controller (WAC)
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the
applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Before installing or performing any service, the power MUST be turned OFF at the branch circuit breaker.
According to NEC 240-83(d), if the branch is used as the main switch for a fluorescent lighting circuit,
the circuit breaker should be marked with "SWD". All installations should be in compliance with the National
Electric Code and all state and local codes.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in serious injury (including death) and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing product. Retain for future reference.
NOTICE: Product/component may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
NOTICE: All new wiring must be fully verified before applying power.
NOTICE: Designed for indoor installation and use only. Dry location rated.
WARNING
Brand Logo
reversed out of
black
WaveLinx
INS #
INS #
Advertisement
Related Manuals for Cooper Lighting WaveLinx
Summary of Contents for Cooper Lighting WaveLinx
- Page 1 Failure to comply with these instructions may result in serious injury (including death) and property damage. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
- Page 2 WaveLinx Wireless Area Controller (WAC) SAVE THESE INSTRUCTIONS This installation instruction is for the Wireless Area Controller (WAC-POE) which enables user control of the WaveLinx system and devices via local control or through the WaveLinx Mobile application. The purpose of this document is to provide sufficient detailed instructions for installation and basic troubleshooting.
- Page 3 Overview The Wireless Area Controller (WAC) is the main component of the WaveLinx Connected Lighting system. WaveLinx eliminates the cost and complexity of typical wireless control system commissioning while providing a wired, flexible, and reconfigurable wireless topology for on the fly space adjustments. The WaveLinx system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings.
-
Page 4: Installation
The Wireless Area Controller (WAC) must be installed in accordance with all local, state, and national electrical codes and requirements. Before mounting the WAC in its final location: Install Wavelinx wireless devices and verify out-of-the-box functionality Mount the Wireless Area Controller (WAC) Ensure the WAC is roughly central to the devices with which it is communicating. - Page 5 Connect to building network Create Construction Group Finalize programing using the WaveLinx Mobile App See WaveLinx Mobile Application user manual for more information ● Where to Mount the WAC Typically installed above the drop ceiling or high on the wall in the center of the space it will be controlling ●...
- Page 6 WaveLinx Wireless Area Controller (WAC) Wireless Area Controller LED Indicators The LED indicators can be used for diagnostics and troubleshooting diagnostics of the WaveLinx system. The table below gives you more information. LED Color Blink Fast Blink Green Connection to...
- Page 7 Factory Defaults ● PAIR button functionality Using the PAIR button on the Wireless Area Controller allows you to add or remove devices to the WaveLinx system, reset building network login information and restore factory defaults. PAIR button press Device outcome...
- Page 8 Locate the Wireless Area Controllers on the site floorplan Identify which WaveLinx devices should be in range and assigned to each Wireless Area Controller Identify the circuit breakers that control WaveLinx devices that are intended to be assigned to the Wireless Area Controller by performing Construction Grouping...
- Page 9 WaveLinx Wireless Area Controller (WAC) All luminaires turn ON when the first occupancy sensor senses motion ● All luminaires turn OFF when the last occupancy sensor times out unoccupied ● All wallstations in the default area control all luminaires together.
- Page 10 Veuillez consulter le site www.cooperlighting.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com/LightingWarrantyTerms para conocer nuestros términos y condiciones. Cooper Lighting Solutions 1121 Highway 74 South © 2020 Cooper Lighting Solutions Peachtree City, GA 30269 Canada Sales All Rights Reserved. P: 770-486-4800 5925 McLaughlin Road www.cooperlighting.com...