Adjusting The Footrest - Baby Trend muv HC57 Series Instruction Manual

SAFETY
TO RELEASE THE CHILD
• To release the harness, push Button on
10)
Center Clasp, the two Harness Buckles
will pop free (Fig. 10).
RECLINE SEAT
• Squeeze recline lever on back of the
11)
seat and adjust to the preferred recline
or upright position (Fig.11).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
TO ADJUST SEAT HEIGHT
WARNING:
Do not adjust
seat height with child in seat.
Adjust seat height before placing
your child in the high chair.
WARNING:
Always
check that the height adjustment
bracket is level and both left and
right sides are locked before
placing child in the high chair.
WARNING:
Never rest
the height adjustment bracket
on the locking pins.
• Squeeze the Release Handles on both
12)
sides simultaneously of the Height
Adjustment (Fig. 12a) and adjust to the
ideal position (Fig. 12b).
DO NOT adjust with child in the seat.
13
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Center Clasp
Fig. 10
Fig. 11
Release Lever
Fig. 12a
Highest Position
Lowest Position
Locking Pin
Fig. 12b
ATTENTION:
Make sure the Height Brackets lock on the
lowest position. rest Height Adjustment
DO NOT
Brackets on the Locking Pins (Fig. 12c).

ADJUSTING THE FOOTREST

• Press the buttons on both sides of the
13)
Footrest to adjust the Footrest up or
down (Fig. 13).
BRAKES
• To engage brakes, apply downward
14)
pressure to the brake tabs. Check that
the High Chair will not move and that
brakes are properly applied. To release,
lift up on the brake tabs (Fig. 14).
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
SAFETY
Fig. 12c
Fig. 13
Fig. 14
14