Maintenance
SMART DIVERTER MAINTENANcE
If you notice a decrease in suction, you should inspect and clean out the small
hose inside the smart diverter according to the following instructions.
1. Unplug cleaner from electrical outlet.
2. Remove both vacuum hose and
brush hose ends from smart diverter.
3. Turn smart diverter cover anticlockwise
and pull out to remove.
4. Remove 3 screws from smart diverter
as shown.
5. Press the slide diverter and pull out
the smart diverter from vacuum body.
Slide
Diverter
While pulling out the smart diverter
from vacuum body , do not close
WARNING
diverter at head level to avoid the
risk of injury. The spring in the smart
diverter could be separated from it
and pop out.
6. Clean up the smart diverter inside.
Depress the slide diverter to
straighten the diverter hose to make it
easier to clean out.
Hose Diverter
7. Replace smart diverter and tighten
the 3 screws to secure diverter into
place.
8. Attach the smart diverter cover by
lining up the tap on the diverter body
with corresponding notch and turn it
clockwise to lock.
9. Replace hoses onto diverter tubes.
maintenance _17