Software Upgrade - Philips 32PFL5657/V7 Service Manual

3. Software Upgrade Procedure
The SW installation in MST182 chassis can be done with USB in two
procedures.
A) Set in Stand by condition by USB.
B) In Set ON condition by USB.
C) SW loading with M-STAR tool
A)
SW installation in Stand By Condition by USB
Sr.
No.
Copy the SW .bin file from computer to
A
Root of our USB drive.
Rename the SW .bin File as
B
PHILIPS.bin.
Keep the set in Mains Power OFF
C
condition.
D Plug in the USB drive In USB port of
E Now Plug in the Mains Power of LCD.
F The RED LED indicator will glow.
G After 2-3 Sec. the LED will Start Blinking
After few Seconds, the LED blinking will
H
stop and set will be released from
Stand by i.e. will become ON.
STEPS
13
PHOTOS