Using Usb Mode; Storing Files To The External Memory - Samsung VP-X110L Owner's Instruction Book

Setting the CAM : Using USB Mode

Storing Files to the External Memory

1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
◆ USB menu screen appears automatically.
3. Move the [ ▲ /▼ ] switch to select <USB 2.0 MassStorage> or
<USB 1.1 MassStorage> and press the [OK] button.
◆ Your PC doesn't recognize the USB device automatically. You may install the USB Driver
manually on Windows 98SE operating system.
4. Disconnect the USB cable if you finish storing.
Notes
✤
Select <USB 1.1 MassStorage> when <USB 2.0 MassStorage> does not work depending on your PC environment.
✤
If you disconnect the USB cable from the PC or the CAM during the data transfer, the data transfer will stop and
the data may be damaged.
✤
If you connect the USB cable to a PC using a USB HUB or with other device at the same time, it might cause conflict
and may not work properly. If this occurs, remove all other devices and try the connection again.
✤
Install the Windows 98SE Driver on Windows 98SE operating system using supplied CD. Refer to page 120 for further details.
✤
It takes about 30 minutes if you download or upload the file of 1GB by connecting the USB cable.
ENGLISH
USB Mode
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
103 103