Samsung HMX-T10BP User Manual page 115

Storage Media
Symptom
Memory card functions do not
operate.
Image cannot be deleted.
You cannot format the memory
card.
The data file name is not indicated
correctly.
Adjusting the image during recording
Symptom
Focus does not adjust
automatically.
The image appears too bright,
flickers, or changes colour.
Image's colour balance is not
natural.
A subject passing quickly through
the frame appears distorted
Explanation/Solution
Insert a memory card into your camcorder properly.
If you use a memory card formatted on a computer, format it again
directly on your camcorder.
Release the lock on the write-protect tab of the memory card
(SDHC/SD memory card), if any.
You cannot delete a protected image. Release protection of the
image using the Protect function.
Release the lock on the write-protect tab of the memory card
(SDHC/SD memory card), if any.
The memory card is not supported on your camcorder or the card
has some problems.
The file may be corrupted.
The file format is not supported by your camcorder.
The file name is displayed correctly only if the directory structure
complies with the international standard.
Explanation/Solution
Set "Focus" to "Auto".
The recording conditions are not suitable for auto focus. Adjust the
focus manually. page 57
The lens is dusty on the surface. Clean the lens and check the
focus.
Recording is being made in a dark location.
Use a light to brighten the area.
This may occur when you make a recording under a fluorescent
sodium, or mercury lamp. Cancel " SCENE" to avoid or minimise
this phenomenon. page 49
The white balance is incorrect. Set the proper "White Balance".
page 52
This is called the focal plane phenomenon. This is not a
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, a subject passing through a frame rapidly
may appear to bend, depending on the recording conditions.
page 74
page 29
page 70
page 29
page 57
page 28
109