Table of Contents
Advertisement
If you do not know the network name when you connect to the AP, click Scan
and select a network from the network name list displayed.
To construct a computer-to-computer wireless network, both computers have
to use the same network name.
6. If a network key is configured in the AP or computer-to-computer wireless
network, select 'Use data security' in [Security Settings] window, and then enter
the same network key. Click Next.
For the network key (WEP KEY) of the AP, ask your AP or network
administrator.
You are recommended to use a network key (WEP KEY) when you construct
a computer-to-computer wireless network to prevent access from
unauthorized users. Create a new network key in the first computer, then enter
the previously created network key in the other computer.
The network key can be 5 to 13 alphanumeric characters (e.g. magic) or 10 to
26 hexadecimal digits (a combination of numbers "0" to "9" and letters "a" to
"f").
7. In the [Power Management] window, click Next.
To use maximum performance by default, select 'Disable'. To minimize power
consumption, select 'Enable'.
This item is not displayed when you configure the computer-to-computer
wireless network settings.
8. In the [TCP/IP Status] window, click Next.
If you want to use a new IP address whenever you select the profile being
configured, select 'Update IP address when selecting a profile.'.
9. In the [NT Adapter Settings] window, click Next.
44 Users Manual
Advertisement
Table of Contents
