Samsung NP-R50 User Manual page 127

Monitor
TV
Notebook
Intel(R) Dual
Display Clone
Extended
Desktop
To switch display devices using shortcut key
You can switch display devices easily by pressing <Fn>+<F4/
key.
Provided that multiple external display devices are connected, the display
order is LCD > CRT > TV > LCD+CRT > LCD+TV > LCD whenever the
<Fn>+<F4 /
You cannot use the <Fn>+<F4/
prompt.
To change display devices easily
Right-click on the desktop, and select Graphics Options > Output To to change
the current display device easily.
To change the screen resolution and color quality
If the screen does not appear clearly, please try to change the screen
resolution and colour quality. In the figure of step 3, select a device, and
configure the color, screen area, and refresh rate.
When using an LCD and a wide monitor, the LCD and monitor screen sizes
may differ. To make them the same size, select 'Apply the same settings to the
2 monitors'.
108 Users Manual
Displays on an external device such as monitor or a projector.
You can only view the screen on the TV.
Displays on the notebook LCD only.
Displays the same screen on the notebook LCD, and an external device such as
monitor or projector.
Extends the screen into the notebook LCD and an external device such as monitor or
projector to use a 2 times larger workerspace.
> keys are pressed.
> shortcut key in the full screen mode DOS
> shortcut