Samsung NP-Q1 User Manual (Vista) User Manual page 61

Method 1. Configuring with the Menu Button
1
Connect the monitor and press the Menu button on the right side to launch the
Menu program.
2
Select the LCD/CRT item from the menu and configure it according to your require-
ments.
Whenever LCD/CRT is pressed, the mode changes between LCD > Clone > Dual
View mode in this order.
● LCD: You can view the computer screen through the LCD only.
● Clone: When selecting this mode, you can view the same screen on both the
LCD and the external monitor.
● Dual View: When selecting this mode, you can view a screen spanning over the
LCD and the external monitor, and you can set different resolutions
for each display device.
Viewing Through an External Monitor Only
The Menu button does not support a function to display the computer screen on an
external monitor only. You can view the computer screen through an external monitor
only by using the Intel program. (
Menu Program
(LCD/CRT Item)
Menu button
p.62 )
61