Preset Timing Modes - Samsung SyncMaster 400DX-2 User Manual

Plug and Play Capability
This LCD Display can be installed on any Plug & Play compatible system. The
interaction of the LCD Display and the computer systems will provide the best op-
erating conditions and LCD Display settings. In most cases, the LCD Display
installation will proceed automatically, unless the user wishes to select alternate
settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with
precision of 1ppm (one millionth) above are used for this product. But the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use it without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product are
6,220,800.
Note
Design and specifications are subject to change without prior notice.
Note
• DX-2 - Class B Equipment (Information Communication equipment for residential use).
• DXN-2 - Class A Equipment.
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system
saves energy by switching your LCD Display to low-power mode when it has not been used
for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver (When used as a Network monitor)
State
Power Indicator
Power Con-
sumption
PowerSaver (When used as a normal monitor)
State
Power Indicator
Power Con-
sumption

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
Specifications
Normal Opera-
tion
On
400DXN-2 190 watts
460DXN-2 250 watts
Normal Opera-
tion
On
400DX-2 160 watts
460DX-2 210 watts
Power saving Power off
mode (Power-switch)
Blinking
Less than 5 watts Less than 5 watts
Less than 5 watts Less than 5 watts
Power saving
mode (Power-switch)
Blinking
Less than 2 watts Less than 1 watts
Less than 2 watts Less than 1 watts
Off
Power off
Off