Wall Mount Kit Specifications (Vesa) - Samsung 320BX User Manual

1
Preparations

1.4.3 Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the product on a ceiling or slanted wall, it may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table
below.
Samsung wall mount kits contain a detailed installation manual
and all parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard
screw specifications.
Do not use screws that are longer than the standard length or
do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
product.
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Do not mount the product at more than a 15 degree tilt.
Always have two people mount the product on a wall.
Product size in inches
32~40
46~55
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
VESA screw hole specs
(A * B) in millimeters
200 X 200
400 X 400
Standard Screw
M8
1 Preparations
Quantity
4
31