Setting The Speaker Listening Distance - Samsung HT-AS1 Instruction Manual

Setting the Speaker Listening Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the centre and surround speakers.
REMOTE CONTROL
1
2
3
4
To exit setup mode
•
Using the SPK DISTANCE button
1 Press the SPK DISTANCE button to select the speaker you
want.
•
2 Press
•
3 Repeat steps 1-2 to set the mode for each speaker.
20
√
Press MENU button, and then press ENTER button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
Press button to select the "DIST SETUP", and then
press ENTER button.
Press button to select the speaker you want.
• Each time you press this button, F.L CEN F.R S.R
will be selected in turn.
...†
Press button to set the speaker distance.
• For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from the
speaker to listening position between 0.3~9.0m in intervals of 0.3m.
Wait for about 5 seconds or press MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Each time you press this button, F.L CEN F.R S.R
DISTANCE OFF will be selected in turn.
...†
button to set the speaker distance.
For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from
the speaker to listening position between 0.3~9.0m in intervals of 0.3m.
If the listening position is beyond the range of speaker distance setup
•
when you place the speaker, set the speaker distance to the maximum.
S.L S.W
S.L S.W
Setting Speaker Distance
Set the distance from the speaker to listening position in intervals of 0.3m.
• F.L (front left) : 0.3m ~ 9m
• CEN (centre) : 0.3m ~ 9m
F.R (front right) : 0.3m ~ 9m
•
S.R (surround right) : 0.3m ~ 9m
•
S.L (surround left) : 0.3m ~ 9m
•
• SW (subwoofer) : 0.3m ~ 9m
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "DIST SETUP".
3
Press SURROUND MODE button to select the speaker
you want.
Each time you press this button, F.L CEN F.R
•
S.W will be selected in turn.
4
Press SELECT( , ) button to set the speaker distance.
• For F.L, CEN, F.R, S.R, S.L, S.W Speaker, you can set the distance from the
speaker to listening position between 0.3~9.0m in intervals of 0.3m.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
GB
S.R S.L
21