connections
CONNECTING TO A TV (VIDEO) (GOOD QUALITY)
1.
Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2.
Turn on the Blu-ray Disc Player and TV.
3.
Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on
the TV screen.
If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
~
the remote control and select VIDEO as the external source of the TV.
COMPONENT OUT
DIGITAL
B
AUDIO OUT
HDMI OUT
LAN
2
USB HOST
OPTICAL
AV OUT
M
`
Noise may be generated if the audio cable is placed too close to the power cable.
`
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 25~27)
`
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of
your TV.
`
If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.
`
The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the SETUP menu.
(See page 39)
_ connections
COMPONENT OUT
COMPONENT OUT
DIGITAL
DIGITAL
AUDIO OUT
AUDIO OUT
HDMI OUT
HDMI OUT
LAN
LAN
USB HOST
USB HOST
OPTICAL
OPTICAL
AV OUT
Red
White
Yellow