Table of Contents
Advertisement
ENG
VCR
Programming the Remote Control for Other Components
58
This TV's remote control can operate almost any VCR, Cable box,
or DVD, in addition to controlling the TV.
➢
The remote control might not be compatible with the TV
manufactured by another company.
1
Turn off your VCR, Cable box, or DVD.
2
Press the SELECT button repeatedly to activate another
component (TV, VCR, CATV, DVD).
Example: If you want to program the remote control to operate
your VCR, make sure that VCR is displayed
3
Press the SET button.
4
Use the numeric buttons to enter the code by manufacturer. Each
code must be three digits long.
Example: To enter the code "6", press 0, 0, and 6.
To enter the code "76", press 0, 7, and 6.
➢
See the remote control code tables to find the appropriate
code for your particular component. If more than one code
is listed, try each one separately until you find the one that
works.
5
Press the POWER button on the remote control.
The component you select should turn on. If it turns on, your
remote control is now set correctly.
➢
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours. If no
other codes are listed, try each code, "000" through "089"
for VCR/DVD and "000" through "077" for Cable box.
6
Once your remote control is set up, press the SET button any time
you want to use the remote to operate your VCR, Cable box, or
DVD.
➢
N When your remote control is in the VCR, CATV, or DVD
mode, the volume buttons still control your TV's volume.
N When your remote control is in the TV or CATV mode,
the VCR or DVD control buttons (PLAY, PAUSE, etc.)
still operate your VCR or DVD.
Advertisement
Table of Contents
