Skipping Unwanted Channels; Sorting The Stored Channels - Samsung WS-32Z408D Owner's Instructions Manual

Skipping Unwanted Channels

Sorting the Stored Channels

➢
Not available in DTV or external input mode.
You can exclude the channels you have chosen from the channels you scanned.
When you scan through the stored channels, those you have chosen to skip are not
displayed.
All of the channels that you do not specifically choose to skip are displayed during
scanning.
1 Press the MENU (
2 Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
3 Press the ▲ or ▼ button to select Channel Manager, then press the
ENTER ( ) button.
➢
It can be displayed simply by pressing the CH MGR (Channel Manager)
button.
4 Press the ▲ or ▼ button to select the channel to be add or erase.
5 Press the ENTER (
6 Press the ENTER (
The (✓) symbol next to the channel appears and the channel is added.
➢ If you press the ENTER (
channel disappears and the channel is not added.
7 Repeat step 4 to 6 for each channel to be added or erased.
8 Press the EXIT (
➢
Not available in DTV or external input mode.
This operation allows you to change the programme numbers of stored channels.
This operation may be necessary after using auto store.
1 Press the MENU (
2 Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
3 Press the ▲ or ▼ button to select Sort, then press the ENTER (
button.
4 Select the channel number that you wish to change by pressing the ◄ or
► button repeatedly.
5 Press the ▲ or ▼ button to select To. Select the new channel number
which you wish to identify by pressing the ◄ or ► button repeatedly.
6 Press the ▲ or ▼ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the ENTER (
The selected channel is exchanged with the one previously stored to the
chosen number.
7 For all the channels to move to the required channel numbers, repeat
steps 4 to 6 after selecting the From by pressing the ▲ or ▼ button.
8 Press the EXIT (
English - 26
) button to display the menu.
) button to move to the ( ) field.
) button to add the channel.
) button again, the (✓) symbol next to the
) button to exit.
) button to display the menu.
) button to exit.
)
)
)
) button.