Table of Contents
Advertisement
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the " " (On/Off) button on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER ( ) button on the remote control to switch the
television on.
Result :
The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, no clear picture
appears. Refer to "Storing Channels Automatically" on page
32 or "Storing Channels Manually" on page 34.
➢
You can also switch the television back on by pressing the
P
(or
/
button on the remote control.
4
To switch your television off, press the " " (On/Off) button again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result :
The screen is turned off and the Standby indicator
on the front of the television lights up in red.
2
To switch the television back on, simply press the POWER ( )
button again.
➢
You can also switch the television back on by pressing the
P
(or
/
button on the remote control.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the " "
(On/Off) button on the front of the television. It is best to
unplug the set from the mains and aerial.
C/P.
on the front panel) or numeric
C/P.
on the front panel) or numeric
Front of the TV
Front of the TV
English - 9
Advertisement
Table of Contents
