Samsung CW-29Z418P Owner's Instructions Manual page 4

Channel - Manual Store
You can store channels, including
T V
those received via cable networks.
Prog.
When storing channels manually,
Colour System : Auto
Sound System : B/G
you can choose:
Channel
– Whether or not to store each of
Search
the channels found Store
– The programme number of each
Move
stored channel which you wish
to identify
 Prog.(Programme number to be assigned to a channel)
 Colour System: Auto / PAL / SECAM / NTSC4.43
 Sound System: B/G / D/K / I / L
 Channel (When you know the number of the channel to
be stored)
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
 Search (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel
or the channel that you selected is received on the screen.
 Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Channel mode
 P (Programme mode): When completing tuning,
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99.
You can select a channel by entering the position
number in this mode.
 C (Air channel mode): You can select a channel
by entering the assigned number for each air
broadcasting station in this mode.
 S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Channel - Channel Manager
You can exclude the channels you have
Manual Store
chosen from the channels you scanned.
: P 1
When you scan through the stored
►
►
channels, those you have chosen to skip
: C--
are not displayed.
: 40 MHz
: ? All of the channels that you do not
specifically choose to skip are displayed
Adjust Return
during scanning.
➢
It can be displayed simply by pressing the CH MGR
(Channel Manager) button.
Method:
▲/▼ : Used to select a channel to be added or erased.
ENTER : Used to confirm the channel selected for adding or
erasing.
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels.
This operation may be necessary
after using auto store.
 From : Channel number to be changed.
 To : New channel number to be identified.
 Store : Confirmation the exchange of channel numbers.
Channel - Name
Channel names will be assigned
automatically when channel
information is broadcast.
These names can be changed,
allowing you to assign new
names.
Method:
▲/▼ : Used to select a letter or number.
◄/► : Used to move to the previous or next letter.
ENTER : Used to confirm the new name.
Channel Manager
P 1 C 4
1/15
Prog.
1 C 4
▲
2 C--
3 S 1
4 S 3
5 S 6
6 S 8
7 S10
▼
Add
Move Enter
Page Return
Sort
T V
From : P 1 ----
To : P-- ----
Store : ?
Move Adjust Return
Name
T V
Prog. Сh. Name
13 C21 А
14 C23 -----
15 C25 -----
16 C26 -----
17 C28 -----
▼
Move Adjust Return
English - 4
Channel - Fine Tune
If the reception is clear, you do not
P 2
have to fine-tune the channel, as
this is done automatically during
Move
the search and store operation.
Adjust
If however the signal is weak or
distorted, you may have to fine-tune the channel manually.
Method:
◄/►: You can obtain a sharp and clear picture and good
sound quality.
▲/▼  ENTER : You can reset the setting.
MENU : You can memorise adjusted picture or sound.
Channel - LNA
(depending on the model)
This function is very useful in the
T V
situation that the TV is used in
▲
weak signal. LNA amplifies the
Fine Tune
LNA
TV signal in the weak signal
area, but not noise.
Move
 LNA (Low Noise Amplifier) setting is to be made for each
channel. If the picture is noisy with the LNA set to On,
select Off.
 Depending on areas, factory mode of LNA will be set up
as On or Off.
Setup - Time
 Clock Set
T V
You can set the television
Clock Set
Sleep Timer : Off
clock so that the current time
On Timer
is displayed when pressing
Off Timer
the INFO button on the
remote control. You must also
set the time if you wish to use
Move
the automatic on or off timers.
➢
When pressing the " I " button (On/Off) on the front
of the television, the clock setting will be reset.
Fine Tune
*
+2
Reset
Return
Channel
More
: Off
Off
On
Enter Return
Time
: -- : -- ►
►
: Off ►
: Off ►
Enter Return
continued...