Using Redial List; Using And Entering Saved Number Dial; Using Automatic Called Number Redial (Acnr) - LG-Ericsson IPECS 1000i Series User Manual

1000i Series IP Phone (SMB)
User Guide
To enter your station user name:
1) Press the Transfer (PGM) button.
2) Dial 74 the Station Name registration code, (for UCP/eMG). '74' is the Code that access the
registration of the Station Name.
Enter the Name, up to 20 characters. Refer to section "1.10.1 Phone Entering Text" for details.
3)
The name may also be configured under the Phone menu. Refer to section "9.2.1.1 Station Name
4)
Program" for details.

4.3.5 Using Redial List

The call logs are saved automatically in the system. Among the call logs, especially the latest dialed number is
dialed as below way.
To dial the Last Number for the call log list:
✓
Press the SPEED button and Dial *.

4.3.6 Using and Entering Saved Number Dial

You may store the last number dialed on an external call to the Saved Number Dial buffer for convenient
dialing later. To use Saved Number Dial feature, you should store a number first. The Saved number is stored
again if a new number is saved.
To place a call using Save Number Dial:
✓
Press the SPEED button and Dial #.
To store a number in the Save Number Dial:
✓
While on an outgoing external call, Press SPEED button twice.

4.3.7 Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is received, Automatic Called Number Redial (ACNR) will
retry the number until the call is connected, the feature is cancelled, or the maximum number of retries is
attempted.
For each retry, the system will activate your speaker then place the call with the microphone muted. When
the remote end answers, you must select the MUTE button, or lift the handset.
Either of these actions cancels the ACNR request as well as connects you to the remote party.
To set up ACNR, while on an outgoing call:
1) Use the Navigation button to display the next Softkey menu and select the ACNR Softkey.
2) Hang-up the handset.
3) The Station try to make a call using ANCR after few seconds later.
To cancel the ACNR request:
✓
Press the ACNR STOP Softkey.
32
Issue 1.0