Table of Contents
Advertisement
SC PE CAN (ENG) 4.QXP
10/23/2020
■
For Type A cluster
■
For Type A cluster
Digital speed ON/OFF mode (For
Type A cluster)
Switch to Speed Mode using the trip
switch in Trip mode, and press and
hold the RESET button for more than
1 second. Then it will be switched
from SPEED ON to SPEED OFF or
the other way around.
6:43 PM
Page 71
Accumulated driving information
mode (for type B cluster)
OFB047122
Displays accumulated information
starting from a mileage/fuel efficien-
cy/time default point.
• Accumulated information is calcu-
lated after the vehicle has run for
more than 300 meters (0.2 miles).
OFB047121
• If you press the "OK" button for
more than 1 second after the
Cumulative Information is dis-
played, the information will be
reset.
• If the engine is running, even when
the vehicle is not in motion, the
information will be accumulated.
Features of your vehicle
Driving Information display mode
(for type B cluster)
OSC040159C
The vehicle will display Driving
Information once per each ignition
cycle.
• Fuel efficiency is calculated after the
vehicle has run for more than 300
meters (0.2 miles).
• If opening the driver's door after turn-
ing off the engine or 3 minutes pass-
es after restarting the engine, the
Driving Information is reset.
• If you press the "OK" button for more
than 1 second after the Driving
Information is displayed, the informa-
tion will be reset.
OSC040160C
4 71
Advertisement
Chapters
Table of Contents
