Epson SOLAR Series Watch Movement Specification And Drawing page 16

Cal.
VR42B
5. How to remove the setting stem
When removing the setting stem,put the setting stem at normal position and push the ''setting lever'' by
tweezers. (Refer to the Fig.[3].)
The ''setting lever'' can not be push if the setting stem is not at normal position.
6. Attention of casing part structure
Use the specified holding ring for dial to prevent rotation of the movement inside of the case in order to
stabilize the button operation.
Refer to the [Solar cell unit] page instruction as to the shape and tolerance.
Use the metal case to prevent from the movement malfunction by static electricity.
7.How to set the hands
Each hand moves at step interval. Set the each hand at correct position according to the scale on the
dial in order not to make a mistake in reading time.
Do not turn the hand forcibly.
8.How to remove the hands
When removing the hands, use exclusive fork-shaped tools.
Do not remove the dial under the condition that any hands are set.
When set and remove the hour hand repeatedly, it may reduce the hand fixing torque because the hour
wheel is made by plastic.To ensure the enough fixing torque, it isn't recommended to re-assemble
the hour hand more than five times.(Type M only)
9. Caution
When charging the watch, do not place it too close to fluorescent lamp or other light sources as the watch
temperature will become extremely high, causing damage to the parts inside the watch.
10. How to set the solar cell lead terminal
Please set 2pcs of solar cell lead terminals in accordance with this illustration.
As to the solar cell lead terminal shape, there is no distinction between upper and lower.
11. How to set the solar cell unit
Push above part of each hook on the solar cell unit into main plate certainly.
Attention-02
Fig.[3]
19/Oct./'18
Date :
Rev. : 00
P. 10-02