Starting A Washing Program; Maintenance And Cleaning - Whirlpool WCTD104HK User Manual

6. STARTING A WASHING PROGRAM

Program Table
Program Program Details
This program is suitable for dishes difficult
1.
to wash. However, it is not applicable to
dishes which cannot be washed with
Intensive
high temperature water.
This program is more reasonable in terms
2.
of energy consumption compared with
other programs.
ECO
We suggest using this program for dishes
without heavy oil and hard to wash.
This program consumes less time and
3.
energy. It is suitable for small quantity
Rapid dishes which are easy to wash.
Cycle for delicate items and lightly soiled
4.
loads, such as glasses.
Glass
Normally soiled crockery. Everyday cycle
5.
that ensures optimal cleaning
performance in a shorter time.
Daily
Suitable for night-time operation of the
6.
appliance. No buzzer will ring after the washing
cycle. Optimum performance ensured.
Silent
7. To rinse dishes that you plan to wash later
that day.
Pre-wash
Light to normally soiled crockery. Everyday
8.
program suitable for non-dried and fresh
soiling, assuring clean and dried dishes in
1 h Wash & Dry
just 60 mins.
9.
Program to be used to perform maintenance
of the dishwasher. It cleans the interior of
the appliance using hot water.
Self-Clean
*If 3-in-1 dishwasher tablet (rinse aid, salt and detergent in 1 dose) is used, please put the whole tablet in the
detergent box directly.
12
Mainwash Detergent*
Running
Temp. (°C) Powder(g)
Time(min)
147 6-10
(50°C)
(55°C)
139 9
(50°C) 28
6-10
(50°C) 76 6-10
(55°C) 90 6-10
(50°C) 162 6-10
/
14
/
(50°C) 60 6-10
(72°C) 38
6-10
Turning on the Appliance
Starting a wash cycle...
1. Draw out the rack, load the dishes and push it back. And then pour in the detergent.
2. Insert the plug into the socket.
Make sure that the water supply is turned on to full pressure. Close the door, press the "Power" button,
press the program button to select a desired Wash cycle. (See the section entitled "Program Table") . With
a little force to ensure the door is properly closed.
NOTE:
A click could be heard when the door is closed perfectly.
Add Dishes During Program Operation
1. Press "Start/Pause" button
2. Open the dishwasher door
3. Pull out the rack and put in left-out tableware
4. Push back the rack into the dishwasher
5. Close the dishwasher door
6. Press Start again to re-start the dishwasher
WARNING!
1. After pressing Pause, don't open the door before the machine stops operate to prevent scald danger!
2. Watch out for the steam and hot water when opening the door!
3. Carefully check if the door is closed!
4. Before re-starting the dishwasher, please check the settlement of the tableware and confirm if there is
any tableware extending out from the bottom of the rack!
7．MAINTENANCE & CLEANING
The filtering system is equipped for preventing large food residue or other objects from entering the
washing pump. Food residue sometimes may block the filtering system.
Cleaning the Filter
2
1
Filter Assembly
To obtain optimal cleaning performance and effect, the filter assembly must be cleaned. The filtering net
can remove food particles in water during the washing cycle. The entire filter assembly should
1. Rotate to the left to take out the filter.
2. The filter is made of three parts; please
disassemble to wash.
3. After cleaning, assemble the filter and
3
then install it back to the dishwasher.
EN
13