Canon LBP253 SM Manual page 144

Item
Display/adj/set range
Unit
Default value
Item
TOUCHCHK
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Unit
Default value
TOUCHCHK-R
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Unit
Default value
■ CLEAR
Item
SRVC-DAT
Title
Details
Adj/set/operate method
COUNTER
Title
Details
Adj/set/operate method
HIST
Title
Details
Use case
Adj/set/operate method
ALL
Title
COPIER > ADJUST > FEED-ADJ
-3048 to 3048(-0.12inch to +0.12inch)
0.001mm
±0
COPIER > ADJUST > PANEL
Correction of coordinate position of Touch Panel
To correct the coordinate on the Touch Panel.
When a problem occurs to the coordinate position in such a way that a position different from the
one that was touched reacts.
Touch the "+ (plus)" mark displayed on the Touch Panel with something with a sharp tip such as a
pen.
Flag to check whether the correction of coordinates on the Touch Panel was properly executed.
To check whether the correction of coordinates on the Touch Panel was properly executed. 1 is
displayed when the correction of coordinates is properly executed. 0 is displayed when it fails.
When executing the correction of coordinates after replacing the Touch Panel with a new one.
0 to 1
0: Not executed
1: Executed
1
COPIER> FUNCTION> CLEAR
Clearing of service mode setting values
To clear the service mode setting values.
The user mode setting values are not cleared.
1. Press Yes key.
2. Turn OFF / ON the main power switch.
Clearing of service counter
To clear the counter by maintenance / part/mode.
The numerator printed on a system dump list becomes 0.
1. Press Yes key.
2. Turn OFF / ON the main power switch.
Clear of logs
To clear the communication management / print / jam / error log.
When clearing logs
1. Press Yes key.
2. Turn OFF / ON the main power switch.
Clearing of setting information
Description
Description
Description
137
7. Service Mode