Connecting To An Aerial Or Cable Television Network - Samsung LW46G15W Quick Setup Manual

Connecting to an Aerial or Cable Television Network

1
Connect the aerial or network input cable to the ANT.IN terminal on the TV.
For more detailed antenna/cable TV connections, see pages 13 of the owner's instructions.
Connecting a VCR or (S-VHS VCR)
VCR Rear Panel
1
Video Cable
(Not supplied)
Audio Cable (Not supplied)
1
Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.
2
Connect an RF cable between the ANTENNA OUT terminal on the VCR and the ANT. IN terminal on the TV.
3
Connect an audio cable between the AUDIO OUT jacks on the VCR and the L-AUDIO-R jacks on the TV.
Connect a video (or S-Video) cable between the VIDEO (or S-VIDEO) OUT jack on the VCR and
4
the VIDEO (or S-VIDEO) jack on the TV.
◆
If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the
L-AUDIO-R jacks on the TV. If your VCR is stereo, you must connect two cables.
◆
An S-Video cable is usually included with an S-VHS VCR.
Cable Television Network
TV Rear Panel
S-Video Cable
(Not supplied)
4
or
3
2
RF Cable
English - 2
or