Appendix 6 How To Check Production Information And Firmware Version; Checking The Production Information - Mitsubishi Electric CC-Link IE-NZ2GNSS2-8D User Manual

Appendix 6

Checking the production information

The production information of a safety remote I/O module can be checked with the following.
• Rating plate
• CC-Link IE TSN/CC-Link IE Field Diagnostics
Checking on the rating plate
PASSED
MODEL
000000000000000 - A
SERIAL
TOKYO 100-8310, JAPAN
Manufactured:
MITSUBISHI ELECTRIC EUROPE BV D-40882 RATINGEN, GERMANY
(1) MAC address
(2) Production information
(3) Relevant standard symbol
(4) QR code
Checking by using CC-Link IE TSN/CC-Link IE Field diagnostics
■Checking by each safety remote I/O module
The production information of each safety remote I/O module can be checked by following the procedure below.
Operating procedure
1.
Connect the engineering tool to the CPU module.
2.
Start CC-Link IE TSN/CC-Link IE Field diagnostics from the menu.
[Diagnostics]  [CC-Link IE TSN/CC-Link IE Field Diagnostics]
3.
Right-click the slave station whose production information to display, and select "Production Information".
4.
The production information appears.
■Checking with the "Station Information List" window
For how to check the production information, refer to the following.
Page 104 Checking station information
How to Check Production Information
and Firmware Version
MADE IN

Appendix 6 How to Check Production Information and Firmware Version

(1)
(2)
(3)
(4)
A
APPX
157