Setting Up Anynet; Switching Between Anynet + Devices - Samsung LE32B530P7N User Manual

Setting Up Anynet +

Option
Setup
Switching between Anynet +
Devices
1
Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-
CEC).
2
Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet + devices connected to the TV are listed. If you cannot find a device
■
you want, press the red button to scan for devices.
3
Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
■ Switching to the selected devices may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
■ The time required to scan for devices is determined by the number of
connected devices.
■ When the device scan is complete, the number of devices found are not
displayed.
■ Although the TV automatically searches the device list when the TV is turned
on via the power button, devices connected to the TV may not always be
automatically displayed in the device list. Press the Red button to search for
the connected device.
■ If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet + function. Make sure to switch to an Anynet +
device by using the Device List.
Description
Anynet + (HDMI-CEC)
■
To use the Anynet + Function, Anynet + (HDMI-CEC) must
be set to On.
n the he Anynet + (HDMI-CEC) function is disabled, all
When the
the Anynet + related operations are deactivated.
■ Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when
the TV is turned Off.
• The active source on the TV remote must be set
to TV to use the Anynet + function.
•
If you set Auto Turn Off to Yes, connected
external devices are also turned off when the
TV is turned off. If an external device is still
recording, it may or may not turn off.
■ Press the TOOLS button to
display the Tools menu. You
can also display Anynet+ menu
by selecting Tools → Anynet+
(HDMI-CEC).
Anynet+(HDMI-CEC)
Device List
Setup
U Move E Enter
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : Yes
U Move E Enter
View TV
Device List
Record : DVDR
DVDR Operation
Receiver : On
Setup
U Move E Enter
■ Only when you set Anynet+
(HDMI-CEC) to On in the Setup
menu, the Device List menu
appears.

►
R Return
R Return
R Return