Samsung LE26A466C2W User Manual page 7

What is HDMI?
➣
- "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels
of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports.
DVI IN(HDMI) [R-AUDIO-L]
- DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component.
➣
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
4 AUDIO OUT [R-AUDIO-L]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theatre.
5 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
6 SERVICE
- LE6A66, LE6A67
Connector for SERVICE only.
- LEA66, LEA67, LEA6, LE7A66, LE7A67, LE0A66, LE0A67, LE0A6
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your
remote control.
7 COMMON INTERFACE Slot
- When not inserting "CI CARD" in some channels, "Scrambled Signal" is displayed
on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and
other information will be displayed in about 2~3 minutes. If an error message is
displayed, please contact your service provider.
- When the channel information configuration has finished, the message "Updating
Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider. Remove the CI
➣
CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
➣
The place of the COMMON INTERFACE Slot may be different depending on its model.
➣
8 SERVICE
- Connector for SERVICE only.
9 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio out connectors on
the A/V device.
0 HEADPHONES JACK
- Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound
from the built-in speakers will be disabled.
480i 480p
X X
X O
O O
English - 
576i 576p
X O
X X
O O
720p 1080i
O O
O O
O O