Advertisement
Fusion
1. Press the Mode button (side) until the Settings (wrench icon) menu is displayed. Enter
Settings by pressing the Shutter button (front).
2. Press the Shutter button (front) three times, to bring up the Connections Settings.
3. Press the Mode button (side) repeatedly, until "RESET" is highlighted; press the Shutter
button (front) to select.
4. Press the Mode button (side) once to toggle and highlight "RESET;" press the Shutter
button (front) to reset the camera connections.
5. Delete the Bluetooth and Wi-Fi entries in your device's settings, using the instructions
described below, before attempting to re-pair to your GoPro using the instructions HERE.
HERO6 Black | HERO5 Black | HERO (2018)
1. From the camera's back screen, swipe down to open the menu.
2. Tap Connect > Reset Connections and then tap Reset.
3. Delete the Bluetooth and Wi-Fi entries in your device's settings, using the instructions
described below, before attempting to re-pair to your GoPro using the instructions HERE.
HERO5 Session
1. With your camera off, press the Menu button to turn on the status screen.
2. Press the Menu button repeatedly until you get to "Connections Settings".
3. Press the Shutter button to select "Connections Settings".
4. Press the Menu button repeatedly until you get to "Reset Connections".
5. Press the Shutter button to select "Reset Connections".
6. Press the Menu button to navigate to "Yes".
7. Press the Shutter button to select "Yes".
8. "Wi-fi Reset Successful" will appear on the status screen.
9. Delete the Bluetooth and Wi-Fi entries in your device's settings, using the instructions
described below, before attempting to re-pair to your GoPro using the instructions HERE.
HERO4 Session
1. Press and hold the INFO/Wi-Fi button for 8-10 seconds; you will be prompted with
"Reset Wi-Fi."
2. Press the INFO/Wi-Fi button once to highlight YES.
3. Press the SHUTTER button once to select YES; the camera will prompt you that the reset
has occurred, then turn off.
4. Follow the pairing instructions HERE. You will set up a new name and password during
the pairing process.
5. Delete the Bluetooth and Wi-Fi entries in your device's settings, using the instructions
described below, before attempting to re-pair to your GoPro using the instructions HERE.
HERO+ | HERO+ LCD
Advertisement
