Advertisement
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
On the screen, you can set as follows.
The each step may vary depending on the Antenna source.
N
Step 1
Plug & Play
Select the OSD Language
▲
Nederlands
Menu Language
: English
English
Eesti
▼
U Move E Enter
Step 4
Plug & Play
Select the Channel source to memorise.
Digital & Analogue
Start
Digital
Start
Analogue
Start
U Move E Enter m Skip
Step 7
Plug & Play
How to get the best perfotmance from your new HDTV
Step 1.
Connect the HD Source Unit to the TV using the Component video (Red, Green,
Blue) and audio (Red, White) cables or HDMI Cable.
HD box
TV rear view
▼
▼
HD Cable
Component Cable
Step 2.
Press the Source button on the Remote Control to select HDMI or Component
Input.
Depending on your location, HD programs may also be viewd using an RF antenna.
For more detalls, please refer to HD Connections in the Owner Manual.
Select 'Home Use' when installing this TV in your home.
Store Demo
Auto Store in progress.
Digital Channels : 5
Enjoy your TV.
E Enter
English - 3
REPERT
EZ VIEW
AUDIO
SUBTITLE
Step 2
Plug & Play
Home Use
L Move E Enter
Step 5
Plug & Play
Frequency 113 MHz
Analogue Channels : 6
15%
Stop
E Enter m Skip
Step 8
Plug & Play
OK
TV/DVD
ZOOM
ANGLE
Step 3
DVD-MENU
Plug & Play
Select Country.
▲
Switzerland
Country
: English
United Kingdom
CIS
▼
CANCEL
U Move E Enter
Step 6
Plug & Play
Set the Clock Mode.
Auto
Clock Mode
: Auto
Manual
U Move E Enter m Skip
Advertisement
