Advertisement
< Go back to Table of Contents page
10
Do I need the new 12 in x 12 in mats with CaptureMat function?
Yes, the new mats have registration marks required for the CaptureMat function
which the old mats don't have. All new mats 12 in x 12 in mats will have the
DesignNCut logo.
How would I know I have the new mats with CaptureMat function?
All new mats that are suitable for DesignNCut have the DesignNCut logo.
Do I have to calibrate my mobile devices to use the CaptureMat function?
Yes, to get best quality it is required that you calibrate all of your mobile device
including your digital camera.
Files:
Can I use FC1 files?
No,
because FC1 files are not formatted for ScanNCutCanvas. You can import the
following files: SVG, FCM or DXF less than 2 MB. You can also use .jpg, gif, png or BMP
files less than 5MB but you have to use the "Image Tracing" function to upload these
type of files, because you'll need the outline to cut, draw or emboss.
Can I use my USB stick directly to the machine?
No, DesignNCut is not a standalone machine you'll need your PC & access to
ScanNCutCanvas via the internet to import the following files: SVG, FCM or DXF less
than 2 MB. You can also use .jpg, gif, png or BMP files less than 5MB but you have to use
www.designncutbybrother.com
For additional help or other inquiries please contact our Brother Support Center
http://www.brother-usa.com/Support/
Call: 1-877-BROTHER (877-276-8437) M-F, 9:00am to 6:00pm Eastern Time
Advertisement
