Change Codes; Set Opening Time; Background Lighting On/Off - Siemens Codelock K44 Duo Installation & User Manual

14 K44 Duo Installation & User manual

Change codes

1 Press B and enter the current password.
2 Enter A22.
3 Enter the current code. If it is a 4-digit code,
enter A after the last digit.
4 Enter the new code using four or six digits.
5 Enter the new code once again.
6 Choose whether or not the code should be
disabled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
7 Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
8 Change the next code by continuing from step
3 or press B to leave code program
K44 Duo Installation & User manual

Set opening time

The opening time determines for how long the lock
should remain open following a correct entrance
code. When K44 Duo is delivered the opening
time is 7 seconds for both relays.
1 Press B and enter the current password.
2 Enter A28.
3 Enter the desired opening time (01-99) using
two digits, e.g. 09 for 9 seconds.
4 Choose which relay output the new opening
time applies to:
0 = both
1 = relay output 1
2 = relay output 2

Background lighting on/off

This is how to turn off the keypad's background
lighting, if needed.
1 Press B and enter the current password
2 Enter A60.
3 Enter 0.
To reactivate background lighting, press 1 in step
3 instead.
15