Table of Contents
Advertisement
Call functions
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [
Using the Speakerphone feature
Use the Speakerphone feature to talk and listen with
the phone a short distance away.
Press [
] and then <Yes> to activate the
Speakerphone feature.
back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
•
Speaker on/Normal: turn on the Speakerphone
feature or switch back to Normal mode.
•
Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
28
].
Press the key again to switch
•
Menu: access the phone's menu functions.
•
Voice on/Voice off: switch off the phone's
microphone so that the other person on the phone
cannot hear you, or switch it back on.
•
Mute keys/Send keys: switch the key tones on
or off.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
Send DTMF: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
•
Phonebook: access the contact list.
•
End held call: disconnect the call currently on
hold.
•
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Advertisement
Table of Contents
