Entering Text
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the 0 or Down key
to display the alternative words.
2. When you press the 0 or Down key at the last
alternative word, the display shows Add on the
bottom line. Press the Add soft key.
3. If necessary, clear the word using the C key and
enter the word you want to add using Alphabet
mode. See page 47.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
Note : This feature may not be available for some
languages.
• To enter periods, hyphens or apostrophes, press
the 1 key. T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The 1 key is used twice to display two
L
E
• To shift the case in T9 mode, use the
There are three cases; Lower case (
Capital (
• You can move the cursor by using the Right and
Left keys. To delete letters, press the C key. Press
and hold the C key to clear the display.
46
punctuation marks:
T
'
S
) and Capital lock (
E
A
T
key.
), Initial
).
.