Table of Contents
Advertisement
Menu functions
Your phone is set by default for connecting to
the network. If you change the settings without
first checking with your service provider, the
web browser, MMS, and e-mail features may not
work properly.
Creating a WAP profile
1. Press <New>. If a profile has already been
saved, press <Options> and select Add
new connection.
2. Select WAP settings, if applicable.
3. Specify profile parameters:
• Profile name: enter a profile name.
• Homepage URL: enter the URL address
of the page to be used as your
homepage.
• Proxy: activate or deactivate the proxy
server.
116
• IP address: enter the IP address of the
proxy server.
• Port: enter the port number of the proxy
server.
• Linger time: set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
• DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
• DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
• Bearer: select the network bearer type.
• Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Advertisement
Table of Contents
