PROEL WAP1 User Manual page 7

5. Make sure the unit is turned off before recharging the batteries.
Insert the batteries in their compartment, ensuring the correct polarity,
and plug in the AC/DC adapter.
6. This unit is provided with a built-in protection to prevent batteries
overcharging.
Technical Specifications
Cautions
1. The AC/DC Adapter is suitable only for recharging batteries. Do not use it
as a power supply.
2. The red LED will flash when charging the batteries. It will automatically turn
off when the batteries are fully recharged.
3. Put the microphone close to your lips. Make sure the distance is not more
than 13 mm.
4. The first time the batteries must be charged for over 14 hours.
5. To extend the life batteries, charge them when the green LED indicator is
turned off.
Proel S.p.A. pursues a policy of constant research and development and therefore reserves the
right to improve its products at any time without prior notification.
Loudspeaker
Max Output Power
Dynamic Microphone
Power Supply (9 V DC)
DC Adapter
Recharge Power
Weight
Dimension (L x H x P)
Use
2,5" 4 Ω Cone
5 W
200 Ω
UM-3 (AA) x 6
12 V DC 300 mA
70 mA – 150 mA
330 g
180 x 80 x 65,5 mm
50 m outdoor/indoor