Advertisement
HOW DO I CONNECT ADDITIONAL SENSORS TO MY STATION?
To connect multiple remote transmitters to the forecast station:
1. Place all sensors and station on the table with batteries out for at least 15 minutes.
2. Insert batteries in the first outdoor transmitter.
3. Insert batteries into the back of the station.
4. When the reading appears in the outdoor temperature area, move to the second transmitter.
5. Insert batteries in the second outdoor transmitter.
6. The outdoor temperature area should show a temperature reading on channel 1 and on
channel 2.
7. When the readings appear in the outdoor temperature area (channel 2), move to the third
transmitter.
8. Insert batteries in the third outdoor transmitter.
9. When RF (radio frequency) connection is established, the respective temperature & humidity
for each of the selected channels (1, 2, or 3) will appear on the main unit. Allow the
transmitters and wireless forecast station to sit near each other for 15 minutes to lock in the
signals.
10. Press and release the SET/CH button to view channel 1, 2 or 3 on the station.
Note: You cannot change channels if only one transmitter is connected.
7 |
P a g e
Advertisement
