Instructions for the Installer
Installing the appliance
Transportation, unpacking
It isrecommended to deliver the appliance in original packaging, in vertical
position considering the protective warning on packaging.
After each transportation the appliance must not be switched on for approx.
2 hours.
Unpack the appliance and check if there are damages on it. Report possible
damages immediately to the place you bought it. In that case retain
packaging.
Cleaning
Remove every adhesive tape, which ensure the parts not to move in the
appliance.
Wash the inside of the appliance using lukewarm water and mild detergent.
Use soft cloth.
After cleaning wipe out the inside of the appliance.
Placement
The ambient temperature has an effect on the energy consumption and
proper operation of the appliance. When placing, take into consideration
that it is practical to operate the appliance between ambient temperature
limits according to the climate class that is given in the chart below and can
be found in the data label.
49