Attaching The X-Feed Guide Shaft - Brother RH-981A Service Manual

3. ASSEMBLY

3-13-3. Attaching the X-feed guide shaft

1. Loosen the four bolts (2) and the two set screws (3) of the X-feed guide shaft (1) so that the shaft is still
temporarily held in place.
2. Insert the Y-feed guide shafts (4) into the X-feed shaft holder R (5) and the X-feed shaft holder L assembly (6)
and the feed bracket (7), and tighten the four set screws (8).
3. Move the feed bracket (7) in the X direction a few times.
4. Tighten the four bolts (2) and the two set screws (3).
45
RH-981A
3767Q